Synthesis of hexacelsian barium aluminosilicate by film boiling chemical vapour process

An original oxide/oxide ceramic-matrix composite containing mullite-based fibers and a barium aluminosilicate matrix has been synthesized by the film boiling chemical vapour infiltration process. Alkoxides were used as liquid precursors for aluminum, silicon and barium oxides. The structure and microstructure of the oxide matrix were characterized by Scanning Electron Microscopy, Energy Dispersive Spectroscopy and X-ray diffraction. Apart from small residual mullite and amorphous phase amounts, the oxide matrix is composed of the hexacelsian phase, conferring to the material interesting perspectives for high-temperature electromagnetic and structural applications.     

Mechanophysical Cues in Extracellular Matrix Regulation of Cell Behavior

The extracellular matrix (ECM) is a macromolecular network that can provide biochemical and structural support for cell adhesion and formation. It regulates cell behavior by influencing biochemical and physical cues. It is a dynamic structure whose components are modified, degraded, or deposited during connective tissue development, giving tissues strength and structural integrity. The physical properties of the natural ECM environment control the design of naturally or synthetically derived biomaterials to guide cell function in tissue engineering. Tissue engineering is an important field that explores physical cues of the ECM to produce new viable tissue for medical applications, such as in organ transplant and organ recovery. Understanding how the ECM exerts physical effects on cell behavior, when cells are seeded in synthetic ECM scaffolds, is of utmost importance. Herein we review recent findings in this area that report on cell behaviors in a variety of ECMs with different physical properties, i.e., topology, geometry, dimensionality, stiffness, and tension.     

基于广义逆矩阵理论的杆系结构形态创构方法#br#

广义逆矩阵理论被广泛应用于不稳定结构的形态分析。不稳定结构在荷载作用下，其形状会发生变化直至其势能达到最低，此时的结构处于无弯矩的平衡状态。根据该原理并结合广义逆矩阵理论提出一种适用于杆系结构的形态创构方法。该方法将杆系模型中杆单元进行分组，在每一组中杆单元总长度不变的条件下，建立控制结构形状变化的移形方程。利用广义逆矩阵理论和势能梯度确定使模型势能下降最快的方向，并逐步调整节点位置直至势能达到最低。临时单元和单元组的引入使得该方法可以应用于多种形式结构的形态创构，合理地设置单元组和临时单元可以实现单元长度与单元内力的重新分配进而实现诸多功能。算例分析说明该方法的特性并验证其有效性。     

Carborane-Containing Matrix Metalloprotease (MMP) Ligands as Candidates for Boron Neutron-Capture Therapy (BNCT)

Based on the previously reported potent and selective sulfone hydroxamate inhibitors SC-76276, SC-78080 (SD-2590), and SC-77964, potent MMP inhibitors have been designed and synthesized to append a boron-rich carborane cluster by employing click chemistry to target tumor cells that are known to upregulate gelatinases. Docking against MMP-2 suggests binding involving the hydroxamate zinc-binding group, key H-bonds by the sulfone moiety with the peptide backbone residues Leu82 and Leu83, and a hydrophobic interaction with the deep P1’ pocket. The more potent of the two triazole regioisomers exhibits an IC₅₀ of 3.7 nM versus MMP-2 and IC₅₀ of 46 nM versus MMP-9.     

综采放顶煤工作面高位巷抽采关键技术研究

为了保证九里山矿1508工作面采空区瓦斯治理效果，通过现场数据测定、实验考察和理论分析，研究了推进度、抽采负压、抽采管网等高位巷抽采关键参数。研究结果表明，工作面煤层越厚、推进度越快，瓦斯涌出量越大；孔抽期间理想抽采负压为25～30 kPa、巷抽期间理想抽采负压为5～10 kPa，高位巷并联支路及管路阻力会影响高位巷的抽采效果。     

矿产资源供应能力评价的FAHP方法

为了合理地开发和利用资源，提高资源利用效率和矿业发展质量，科学论证与评价矿产资源供应能力，具有重要的理论意义和现实意义。采用定性定量相结合的模糊层次分析法（FAHP），构建了矿产资源的供应能力的评价模型，并以我国2006—2015年钴资源的历史数据为例，将资源禀赋、供需市场、政治环境作为评价准则，通过对评价指标进行分析，得到了钴资源供应能力的评价值均在1以下，并呈现逐年下降趋势。研究结果表明，我国钴资源的供应能力整体偏弱，今后几年钴资源供应能力仍会维持在较低水平。     

Evaluation of the moulding process for production of short-fibre-reinforced C/C-SiC composites

For the production of C/C-SiC brake discs via the liquid silicon infiltration method (LSI), the hot pressing process is the state of art technique for the moulding of the CFRP composites. This technique consists of several manual steps which increase production cost. The overall cost can be reduced by implementing injection moulding process.In this paper the influence of the moulding process (hot pressing, injection moulding) on the properties of semi-finished and final products during the production of short-fibre-reinforced C/C-SiC composites by means of the LSI process are examined. The starting polymer is chemically characterised. Carbon-fibre-reinforced plastic (CFRP) composites are fabricated by hot pressing, as well as injection moulding process. The CFRP composites are converted into porous C/C composites by pyrolysis. Liquid silicon is infiltrated to form dense C/C-SiC composites, which are further investigated during the course of this paper. Significant differences in properties of the composites are discussed.     

匹配机械弹性车轮的电子稳定控制器参数分析

为了提高匹配机械弹性车轮(MEW)的某越野车操纵稳定性，考虑MEW与传统子午线轮胎侧偏特性存在的不确定性摄动，基于Lyapunov稳定性理论为电子稳定控制(ESC)程序设计了鲁棒反馈控制器；引入轮胎侧偏刚度不确定性的范数有界模型，运用Schur补引理和线性矩阵不等式(LMI)求解反馈矩阵。设定不同的车速和路面附着系数，通过搭建CarSim/Simulink联合仿真平台对控制器展开鱼钩试验，仿真结果表明，匹配MEW的ESC控制器能够保证车辆行驶的稳定性，横摆角速度与质心侧偏角跟踪误差分别稳定在0.03~0.3 rad/s与0.06~0.1 rad之内，并且设计的控制算法对MEW在05倍普通充气车轮侧偏刚度变化范围内具有很好的鲁棒性，从而为匹配MEW的整车主动安全控制提供了理论参考。     

Composite mixed matrix membranes incorporating microporous carbon molecular sieve as filler in polyethersulfone for CO2/CH4 separation

Membrane technology has been considered a key factor for sustainable growth in high-efficiency gas separation. Current mixed matrix membranes (MMMs) technology is rising, but these membranes in the dense structure are having difficulties in operating at high pressures and scale up for commercialization. The purpose of this research is to synthesize composite MMMs (CMMMs) consisting of polyethersulfone (PES), carbon molecular sieve (CMS 1–5 wt %), and Novatex 2471 nonwoven fabric (support layer). The membranes' physical, chemical, and thermal properties were evaluated by different analytical equipment. The morphology of both PES and PES-CMS composite membranes had a porous and asymmetric structure, in which CMS was uniformly distributed in the polymer matrix. The thermal properties showed that the membranes were stable up to 350 °C with a single glass transition temperature. The functional groups in the membrane were confirmed by spectral analysis. The gas performance results showed that carbon dioxide permeance increased with increased CMS concentration and methane permeance decreased due to the hindering effect of CMS under similar operating conditions. The highest selectivity achieved was 12.774 using CMMM of 5 wt % of CMS at 10 bar, which on average was 137.80%, improved selectivity compared to pure PES membrane. The support layer was able to withstand high operating pressures and showed the ability to scale up. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48476.     

Microstructure and Mechanical Properties of Cu Matrix Composites Reinforced byTiB2/TiN Ceramic Reinforcements

Cu matrix composites reinforced by TiB₂/TiN ceramic reinforcements (Cu/TBN composites) were prepared by hot pressing method. Prior to the hot pressing, Cu/TiB₂/TiN composite powders (CTBN powders), which were used as the starting materials of Cu/TBN composites, were fabricated by self-propagating high-temperature synthesis method. The CTBN particles were found to be in a special core-shell structure with a Cu-Ti alloy core and a TiB₂/TiN ceramic shell. The test results presented obvious improvements in mechanical properties. The highest ultimate tensile strength reached up to 297 MPa, 77 MPa higher than that of Cu. And the highest hardness reached up to 70.7 HRF, 15.7 HRF higher than that of Cu. A comparative study indicated that the core-shell structured particles could bring about more obvious strengthening effect than the traditional irregularly shaped particles, which was due to the improved Cu/ceramics interfacial bonding, the linkage strengthening effect of both TiB₂ and TiN, and higher load bearing ability of the core-shell structured reinforcements.